Product description
1x32 Multi Channel Single mode and Multimode Optical Switch fiber optical switch
Any 1xN configuration, Any fiber type, Wide band working wavelength, 1x32 Multi Channel optical switch is a kind of light path control equipment,can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.
Feature
1.a kind of functional component, with the ability of switching optical route.
2. 1 input and N output fiber ports that selectively transmits, redirects,
3.or blocks optical power in a fiber optic transmission line.
4. bi-directional and can be used in either the 1xN or Nx1 direction.
5. designed for use in optical fiber communication networks and measurement instruments.
Specification
| Parameter | Unit | 1x4 | 1x8 | 1x12 | 1x16 | 1x24 | 1x32 | 1x64 | 1x128 |
| Wavelength Range | nm | 1260~1650 |
| Testing Wavelength | nm | 1310/1550 |
| Insertion Loss (Typical) | dB | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 1.0 |
| Insertion Loss (Max) | dB | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.2 |
| Return Loss | dB | SM ≥ 50 |
| Crosstalk | dB | ≤-70 |
| PDL | dB | ≤0.05 |
| WDL | dB | ≤0.20 |
| TDL | dB | ≤0.20 |
| Repeatability | dB | ≤0.02 |
| Lifetime | times | >107 |
| Switching Time | ms | ≤10 (Adjacent Channel) |
| Optical Power | mW | ≤500 |
| Control Mode | / | TTL or Customized |
| Operating Temperature | ℃ | -10~+55 |
| Storage Temperature | ℃ | -40~+85 |
| Module type Dimensions | mm | 135x64x32 | 135x60x37 | 184x78x66 | 184x156x66 |
Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX
| OSW | Mode | Wavelength | Package | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| 1x4 1x8 1x16 1x32 1x64 1x128 S=Specity | S=SM M=MM | 85=850nm 13=1310nm 15=1550nm 85/13=850/1300 13/15=1310/1550nm S=Specify | B=Metal Box S=Specify | M5=50/125 M6=62.5/125 S9=9/125 S=Specify | 25=250um 09=900um S=Specify | 05=0.5m 10=1.0m S=Specify | 00=None FP=FC/UPC FA=FC/APC SP=SC/UPC SA=SC/APC LP=LC/UPC LA=LC/APC S=Specify |
PIN Configurations
DB-9 male connector (1xN≤16) Optical Switch
| DB-9 male connector |
| Pin No. | I / O | Signal | Description |
| 1 | Input | D0 | D0~ D3 is channel selection Bit0~Bit3,D0 is low, D3 is high |
| 2 | Input | D1 |
| 3 | Input | D2 |
| 4 | Input | D3 |
| 5 | Input | RESET | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 6 | Out | READY | TTL, Ready (High=Not ready, Low=Ready) |
| 7 | Out | ERROR | TTL, Error OR Failure , (High=Error, Low=No error) |
| 8 | Power | GND | Ground |
| 9 | Power | VCC | 5.0±5% VDC Power Supply (max 500mA) |
DB-15 male connector (1xN≤128) Optical Switch
| DB-15 male connector |
| Pin No. | I / O | Signal | Description |
| 2 | Input | D0 | D0~ D5is channel selection Bit0~Bit4,D0 is low, D4 is high |
| 3 | Input | D1 |
| 4 | Input | D2 |
| 5 | Input | D3 |
| 6 | Input | D4 |
| 10 | Input | D5 |
| 11 | Input | RESET | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | Out | READY | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | Out | ERROR | TTL, Error OR Failure , (High=Error, Low=No error) |
| 1,9 | Power | GND | Ground |
| 12 | Power | VCC1 | 5.0V±5% VDC motor power (max 950mA) |
| 15 | Power | VCC2 | 5.0V±5% VDC Drive circuit power(50mA) |
| 13,14 | | NC | NC |
Shipping
Q1:Can I have a sample order? What is your MOQ?
A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, ALI etc.
Q4: What is your warranty time
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.
